Spruce Node
Last updated:
| Product | Spruce Node |
|---|---|
| Hardware rev | A |
| Author | Erik MacLennan |
Brief description of what the Spruce Node is and when this guide applies. (TODO: replace with the real one-paragraph context — what the assembly does, where it sits in the larger system, and any prerequisites.)
Main board prep
Section titled “Main board prep”1. Mount the main board
Section titled “1. Mount the main board”Parts: TODO. Tools: TODO.
TODO instruction text.
2. Seat the ribbon connector
Section titled “2. Seat the ribbon connector”Parts: TODO.
TODO instruction text.
Sensor head
Section titled “Sensor head”3. Install the sensor module
Section titled “3. Install the sensor module”Parts: TODO. Tools: TODO.
TODO instruction text.
4. Route the sensor flex
Section titled “4. Route the sensor flex”Parts: TODO.
TODO instruction text.
Housing closure
Section titled “Housing closure”5. Seat the rear housing
Section titled “5. Seat the rear housing”Parts: 1× rear housing assembly (flex cable pre-attached).
Lift the rear housing carefully — the flex cable (1) tethering it to the main board is short, so do not pull beyond about 30°. The battery (2) remains seated in the main body.
6. Drive perimeter screws
Section titled “6. Drive perimeter screws”Parts: TODO. Tools: TODO.
TODO instruction text.
Verification
Section titled “Verification”- TODO observable check (“All four screws sit flush”)
- TODO observable check